OM STEEL ENTERPRISES

16Mncr5 grade is a low alloy chromium, manganese case solidifying steel. Carburised 16MnCr5 gives a hard case with a solid center whilst holding a level of durability. It is suited for applications which require a blend of toughness and wear resistance and is commonly supplied in round bar.It can be used in higher stressed components like gears, shafts, crankshafts, connecting rods, cam shafts, etc.

Features: 

•    Heat Treatment
•    Hardenability
•    Soft Annealing
•    Intermediate Annealing
•    Normalizing
•    Carburizing
•    Core Hardening
•    Tempering
•    Forging
•    Machinability

We at om steel enterprises is highly recognized name in the industry, highly engrossed in Supplying, Trading and Retailing a broad spectrum of Case Hardening Steel Grade 20MnCr5. Alloyed case hardening steel for parts with a required core tensile strength of 1000 – 1300 N/mm² and good wearing resistance as boxes, piston bolts, spindles, camshafts, gears, shafts and other mechanical controlling parts.

Features:

•    Soft Annealing
•    Carburizing
•    Hardening
•    Tempering
•    Forging
•    Machinability
•    Heat Treatment

EN36 is a 3% nickel, chromium, molybdenum grade. Carburised EN36 gives a hard case with a strong core, whilst holding a remarkable level of durability. EN36(carburized) is utilized widely by all industry areas for segments and shafts requiring high surface wear resistance, high center quality and effect properties. Normal uses are: Heavy Duty Bushings, Collets, Conveyor Pins, Heavy Duty Gears, King Pins, Ring Gears, Sprockets, Shafts etc.

Features: 

•    Heat Treatment
•    Tempering
•    Softening

En 353 steel has carbon substance of 0.17% and the most widely recognized type of steel as it's gives material properties that are adequate for some automobile applications such as heavy duty gear, shaft, pinion, cam shafts, gudgeon pins. It is neither remotely weak nor ductile because of its lower carbon substance and lower hardness. As the carbon content increases, the metal becomes harder and stronger.EN 353 steel is an easily available and cheap material that is acceptable for heavy duty applications.

Features:

•    Heat Treatment
•    Tempering
•    Hardness

SAE 8620 is a low nickel - chromium - molybdenum medium hardenability, case solidifying (carburizing) steel, by and large supplied in the as rolled condition with a most extreme brinell hardness of 280 (Rc30).Characterised by great center quality and sturdiness in little to medium areas with case hardness up to Rc62 when carburized, solidified and tempered. 8620 can also be used (uncarburised) as a high tensile steel, which when suitably hardened and tempered can be utilized for various applications requiring good tensile strength and reasonable toughness.SAE 8620 is suited for applications which require a mix of durability and wear resistance. This evaluation is generally supplied in round bar. Typical uses are Arbors, Bearings, Bushings, Cam Shafts, Differential Pinions, Guide Pins, King Pins, Pistons Pins, Splined Shafts, Ratchets, Sleeves and so on.

Features:

•    Heat Treatment
•    Tempering
•    Cold Working
•    Welding
•    Forging
•    Annealing
•    Hardening
•    Hot Working
•    Machinability